Modifying car speakers is one of the most cost-effective ways to upgrade car audio systems, and if you need extra bass, you need to make sure to choose the right speakers. No matters where you are, good music will always be your best companion most of us like good music when we travel.
Therefore, if you need high-quality music on the road, the best way is to buy a good speaker for your car. Car speakers are those components that can be upgraded in any vehicle to improve the sound and bass quality.
Unfortunately, there are many speakers on the market, and it is no easy task to get the best car speakers for bass without a subwoofer. It takes a lot of searches to finally find the finest, and when deciding which speaker to buy, you should consider hundreds of technical specifications in advance.
Running a studio as a Music creator making me knowledgeable in Acoustics industry. I’ve personally researched, compared, and hand-picked Top Quality Products for my use and write experienced review.WHO I AM?
7 Best Car Speakers for Bass without Subwoofer 2022
- JVC CS-J620 300W Car Surround Sound
- BOSS Audio Systems CH6930 Car Speakers for Bass
- Lanzar 12 Inch Car Subwoofer Speaker
- BOSS Audio Systems CH10DVC Speakers for Cars
- JBL GTO629 Premium Car Speakers for Bass
- CT Sounds TROPO Car Door Speakers for Bass
- Pyle PLPW12D High-Quality & Durable Subwoofer
In this article, we have listed the 7 best car speakers without a subwoofer, did some research, and translated all the technical terms so that you can make an informed buying decision.
1) JVC CS-J620 300W Car Surround Sound
- Poly Ether Imide balanced dome tweeter
- Black ABS Composite Grills
- Frequency Response is 35 – 22,000 Hz
- Sensitivity is 92 dB
The JVC CS-J620 used a mica diaphragm and mixed surround sound on the stamped steel frame to provide you with an economical car speaker set that matches or exceeds the performance of traditional 6-1/2 inch speakers.
The 30W RMS power control of each speaker allows users to add a moderate amplifier instead of ordinary speakers to extend the life of their audio system and successfully achieve the full performance of the CS-J620.
The dome tweeter is balanced with a 1-inch polyester imide, creating a tweeter that traditional speakers don’t have, making it an instant upgrade.
The polyetherimide material enables the speaker to reach a maximum frequency of 22,000 Hz. The CS-J620 uses mixed media, rubber, and fabric with cones to handle low and medium frequencies, up to 35 Hz.
Together with the tweeter, these materials provide instant and full sound. You can easily update the OEM driver. JVC CS-J620 has a 1-26 / 32-inch flat frame, which can simplify installation to the greatest extent. The flat frame prevents collisions with other obstacles in blinds, glass, or door leaves.
In addition, JVC CS-J620 has a preset holes pattern, which can further reduce the hassle of customizing speakers to match your vehicle’s specific installation mode. For installations that require slight modifications, JVC provides mounting screws and plugs.
- Pre-arranged holes for flexible mounting options
- Mica Cone and Hybrid Surround Sound System
- Woofer is made of Mica Injected Polypropylene
- Instant upgrade of OEM drivers
- Scratchy and distorted sound comes from one speaker.
2) BOSS Audio Systems CH6930 Car Speakers for Bass and Sound Quality
- Poly Injection Woofer Cone
- Full Range 6″ x 9″ 3-Way Speaker Pair
- 400 Watts RMS Power Handling per Pair
- 50 Hz to 20 kHz Frequency Response
Just look at the BOSS Audio Systems CH6930 and you will understand why they are called Chaos Supreme. The red membrane made of polyethylene injection molding provides a clear sound, while the rubber surround ensures smooth response and durability. Piezoelectric tweeters have several advantages over traditional tweeters.
First, they are durable for the usual overloading. Second, it destroys most HF drivers, and because of their electrical characteristics, they can be used without a divider. Some parts of the molecule are positively charged. Polyurethane is one of the polymers.
It is a robust, flexible, and durable material that provides maximum flexibility to create an outstanding sound that is durable. Boss Corporation has done this again and made a higher quality speaker sound than the competition in this price range.
The Boss Audio CH6930 speaker uses the entire audio bandwidth with maximum performance. In addition, their design has high sensitivity, which means they can produce higher output with maximum power consumption.
These speakers have ultra-high fidelity, providing crystal-clear sound quality and incredible midrange that you can actually hear.
It has higher thermal strength and fatigue characteristics and improves productivity and efficiency under harsh working conditions by reducing weight and increasing operating temperature.
Rubber is not a breathable material and can withstand the effects of various weather conditions. We use it to surround many of our speakers to connect the cone to the basket.
- Tweeter and Polyimide Cone per Speaker
- It is designed with butyl rubber that offers excellent resilience
- Premium Sound Quality
- It can produce the 92 dB level of sound
- It terminates the most HF drivers
3) Lanzar 12 Inch Car Subwoofer Speaker
- High-performance dual magnets
- 1,600 watts MAX power
- Non-pressed paper cone
- Kapton voice coil
At the time of release, we believed in craftsmanship, quality, and precision. All of these are necessary to ensure accurate design quality and sound reproduction. These are the cornerstones of our entire release product line. Our Opti drive series products are an essential choice for dB resistance professionals.
Use Lanzar 12 inch high-quality, durable subwoofers for car to provide performance and quality to your audio system. Connect additional equipment to your audio system and amplify the power and sound for excellent bass.
The Lanzar subwoofer will breathe new life into your audio system, especially when you have a wide range of amplifiers. They are the driving force behind any great audio system, providing you with the sound quality and performance you lack.
Whether you want to upgrade your car or start the audio system, Lanzar has everything you need to play music.
Introducing the MAX series speaker lets your voice reach the MAX level. Packed in a small box, this 12-inch subwoofer can add some charm to your low end and give you the massive sound you want. Two-layer high-temperature resistant Kapton voice coil with two 80oz high-performance dual magnets with a rated power of 1600W.
In the stamped steel basket, it is a durable fatigue-free unique rubber suspension. Immerse yourself in the world of excellent sound quality.
Lanzar audio speaker systems for ships and vehicles are one of the most advanced components in automotive electronics. Lanzar products result from extensive engineering programs whose sole purpose is to improve performance through better sound.
- Superior Sound Quality and Performance
- Powerful and versatile sound system
- Durable and fatigue-free rubber suspension
- Hex key input terminals
- Without amp, it will damage easily
4) BOSS Audio Systems CH10DVC Speakers for Cars with Good Bass
- Polypropylene Cone
- Sealed Enclosure Internal Volume
- Sensitivity SPL 84 dB
- 10 Inch 1500 Watt Dual 4 Ohm Voice Coil Speaker
The BOSS Audio Speakers for Cars with Good Bass must go through a brief but essential “tuning process” before activating under adverse conditions. Then, the “custom” process ensures that the subwoofer works as expected.
First, turn on the enclosed subwoofer for a few hours at low to medium volume. Usually, 3-4 hours is enough for the subwoofer hanger to fully loosen to prevent overheating and damage to the voice coil.
Polypropylene is a strong and durable material used in thousands of applications in almost any field. It can be used to make pipes, car molds, and bags. In the particular case of our cones, this material provides the highest performance. Produce speakers with excellent sound quality that can use for a long time.
Butyl rubber is a synthetic rubber valued for its chemical inertness, airtightness, and ability to withstand various weather conditions. This rubber has many different uses, from fitness equipment to auto parts, the medical industry, etc.
CH10DVC speaker provides power performance at higher temperatures and improves gaming efficiency by reducing weight. In addition, this type of cabinet is larger than a closed cabinet and has a higher sound pressure level, resulting in a strong bass.
To optimize the tuning and performance of the subwoofer in housing with a connection, we recommend using an amplifier with subsonic filter.
This subwoofer works well in a closed enclosure, reproducing dense, solid bass. The dual voice coil subwoofer provides greater flexibility in wiring adjustments.
By adding additional subwoofers, you can easily combine wiring configurations to optimize the amplifier’s output. Two coil subwoofers are ideal for medium and high-power applications.
- Increased temperature strength
- Heavy-duty, long-lasting playtime
- It comes with a 3-year warranty
- Increased fatigue properties
- Watt rating is just a lie
5) JBL GTO629 Premium Car Speakers for Bass
- Patented UniPivot tweeter
- Carbon-injected cones
- Ford non-symmetric four holes patterns
- Adhesive-backed foam gasket strips
The JBL GTO629 Premium Car Speakers is the perfect upgrade to your current car speakers. They are made of carbon-infused diffusion material and can reproduce music exactly as the artist intended. This allows you to use every watt of power that a stable mainframe or 4-ohm amplifier can produce.
These speakers use vented magnets and high-heat-capacity voice coils, which can effectively dissipate heat and ensure the product’s longevity. The peripheral diffuser can provide higher sound levels with the same output.
The high-frequency performance of the JBL GTO629 speaker will make you very satisfied when listening to your favorite music. The JBL series speakers have the technology to meet your needs.
JBL GTO is a traditional two-way coaxial tweeter midrange driver that uses textile dome tweeters with 6-inch and 1-inch midrange speakers. The minimum installation depth is about two inches, so these speakers may fit any door.
JBL GTO629 is equipped with UniPivot, an innovative feature that brings the tweeter to the listening position to achieve a high-frequency response and better stereo imaging at the listener’s ears.
You can also easily adjust the tweeter output from 0 to +3 dB to compensate for deep and off-axis installation locations or street noise. The system is designed for 180W peak power or 60W continuous power. The steel mounting ring is installed in various hole sizes from 6″ to 6.75″.
The wide frequency response above 20 kHz helps to compensate for differences in speaker placement in vehicles and human hearing impairment in the high-frequency spectrum above 15 kHz. Therefore, this JBL speaker provides a broader frequency response and high-quality sound.
- High heat resistant voice coils
- High-frequency spectrum for hearing impaired persons
- 93 decibels sensitivity at 1 meter
- Coaxial speaker to produce sharp and clear sound
- Bass is comparatively low as competitors
6) CT Sounds TROPO Car Door Speakers for Bass
- Double Slug Y30 Grade Optimized Motor
- 3% Carbon Fiber Reinforced Cone
- Advanced Air Cooling System
- Embossed CT Sounds logo
The CT Sounds Tropo 8” Car Door Speakers for Bass is a perfect combination of high-quality components and delicate craftsmanship. The dust cover and basket are embossed with the CT Sounds logo.
It is equipped with a powerful Y30 dual ferrite magnet which can provide huge power and weighs 25% heavier than our Bio series. It is sturdy and looks great. The cone is made of polypropylene and is stitched twice.
Therefore, it provides a longer service life. The spider is a mixture of polyester and cotton. It also has two high-temperature voice coils. The subwoofer is equipped with a 3-inch 4-layer high-temperature copper voice coil, an optimized Y30-level double ball motor, a stamped steel basket, a high-foamed flexible frame, a double round copper ribbon wire braid, and a high-quality spider bag.
CT Sounds TROPO 8-inch subwoofer has a standard output of 400W RMS and is designed to balance price and performance without compromise.
CT Sounds provide customers with the highest quality subwoofer, the best performance and reliability on the market, and an excellent price/performance ratio. We offer 4 different series, named after the atmosphere, each series provides better performance.
Compared with the Bio series, Tropo has obvious performance advantages. With a more powerful motor, larger voice coil, and optimized suspension, the Tropo series has become an SQ-focused driver in CT sound without sacrificing the subwoofer’s performance. This will make Trope powerful and sound great.
Whether you are building a complex standalone controller or a demo monster, these drives’ frequency response and performance will not disappoint. It has a 4-layer copper voice coil with a carbon fiber reinforced polypropylene paper cone.
Your friends will be impressed and surprised by the performance at a low price. CT Sounds are known for their quality, performance, reliability, and economy.
- Affordable and Reliable Speaker in its Class
- Strong and stamped steel basket
- Loud, clear bass and sound
- Distortion occurs when the volume is full
7) Pyle PLPW12D High-Quality & Durable Subwoofer
- Dual 4 ohm impedance
- 1600 watt power
- Power Series Dual Voice Coils
- Push down speaker terminals
If you are looking for a clean, powerful, and versatile new sound, Pyle can provide you with an audio solution. Use high-quality, durable subwoofers to offer performance and quality to your audio system. The Pyle Power series subwoofer takes your voice to a new level maximum. This 12-inch snare drum will add a bit of flavor to your bass and give you the loud sound you want.
The sound is reproduced by a 2 inch, 4 layers, dual 60-ounce high-temperature voice coil, and heavy-duty magnet with a maximum drive power of 1600 watts. Everything is packed in a stamped steel basket to increase stability.
Specially treated foam edges and uneven ventilation motor design can ensure the safety of your equipment and extend the life of the subwoofer.
The Pyle subwoofer breathes new life into your audio system. The sound projection subwoofer has a dual impedance of 90 dB and 4 ohms, which makes up for the shortcomings of the smaller cables used in many modern cars. This will ultimately reduce distortion, so you can enjoy the crisp sound.
These powerful systems are the driving force behind any great audio system, providing you with the sound quality and performance you have missed. Whether you want to upgrade the audio system for a car, boat, motorcycle, or home, Pyle has everything you need to play music.
- Higher operating temperatures
- It can produce 90dB loud sound
- Stereo sound and impressive bass
- It has Non-Press Paper Cone
- The used plastic is of low quality
Buying Guide for Best Car Speakers for Bass without AMP
We should probably start with the power rating, one of the most essential secret factors for getting a loudspeaker that will wow you with bass. For the nominal power, you have the RMS value.
There is another peak to worry about, but since you don’t want your speakers to explode due to excessive power, let’s focus on RMS. Generally, the higher the RMS value, the more power the speaker can handle and the better the bass effect.
Impedance is usually measured in ohms and is closely related to the rating of car speakers. When it comes to impedance, the rule of thumb is: the lower the impedance, the better.
For a subwoofer without a subwoofer, the best car speaker system should strive to obtain a speaker system with an impedance as low as 4 ohms or even lower. The lower the impedance, the more power you can send to the speakers.
Frequency response is basically the range of frequencies that can be heard by the human ear. Since this is bass, you’d better focus on the low end of the scale. In the range of 20 Hz to 20 kHz, the best subwoofer should have the lowest range, around 30 Hz.
Thanks to this; you can definitely get excellent bass quality. Whether you buy a component speaker or a coaxial speaker, you should not ignore the frequency response.
Material of Construction:
Although it has the best performance, sensitivity, and frequency response, it is not the best car subwoofer without a subwoofer if the structural materials are not good enough.
This is the purpose of the speaker. When you listen to a stereo system, you really want the best sound quality. The most important part is the frequency range. The greater the capacity of the speakers, the better they can reproduce sound.
In most cases, the audio frequency that your speakers will play is between 10 Hz and the maximum frequency of 20,000 Hz.
Loudness and Sensitivity:
Decibels are the actual measures of speaker volume. Therefore, this is one of the most critical factors you need to understand when buying a speaker. A typical car audio system is in the range of 90-130 decibels. Therefore, 130 decibels is the volume that challenges your pain threshold.
For a better understanding of decibels, if you add 3 decibels to any volume, you can hardly hear it, and if you add +10 decibels, you can almost double the volume. The sensitivity level of the car speaker system is measured in decibels.
If you reach any sound above 88 dB, you will definitely be satisfied with this speaker; anything about it is better. The advantage of having a high-sensitivity car speaker system is that you don’t have to worry about audio distortion or delay at high volumes.
The best car speakers without amp are available in the market in different price brackets. The best thing about these is that you can buy an excellent budget speaker for your ride.
The more expensive sound system comes with more features and better sound quality. The affordable speakers promise to deliver high-quality audio. Besides, you can find plenty of models at any price you want to name.
All you have to do is determine the brand, go to the nearest store and buy the best pair that suits your budget and preferences.
Editors Pick # 1
After comprehensive use of CT Sounds TROPO Car Door Speakers for Bass for 4 weeks, I can choose it for my first pick in car speakers. This speaker has Double Slug Y30 Grade Optimized Motor, 3% Carbon Fiber Reinforced Cone, Advanced Air Cooling System, and Embossed CT Sounds logo.
The subwoofer is equipped with a 3-inch 4-layer high-temperature copper voice coil. CT Sounds provide customers with the highest quality subwoofer, the best performance and reliability on the market, and an excellent price/performance ratio.
Editors Pick # 2
In my daily use of JBL GTO629 Premium Car Speakers for Bass for 3 weeks, I can choose it for my second pick in best car speakers for bass without a subwoofer. This speaker has a Patented UniPivot tweeter, Carbon-injected cones, Ford non-symmetric four holes patterns, and Adhesive backed foam gasket strips.
The high-frequency performance of the JBL GTO629 speaker will make you very satisfied when listening to your favorite music. The wide frequency response above 20 kHz helps to compensate for differences in speaker placement in vehicles and human hearing impairment in the high-frequency spectrum above 15 kHz.
To increase the bass frequency in the car, reduce the gain of the subwoofer amplifier to the minimum, increase the low-pass filter to the maximum, turn off the bass boost, and set all tone controls to midrange. Then, play a familiar piece of music, including high, medium, and very low notes.
To get the best bass car speakers without a subwoofer, choose speakers with impedances as low as 4 ohms or lower. The lower the impedance, the more power you can transmit to the speaker.
The subwoofer is suitable for those who need an extra base in the car and want to enjoy every beat of music. Unfortunately, a subwoofer with a larger shell cannot be installed in the door. Therefore, when installing a subwoofer, you usually cannot choose a car door.
You can take the following six measures to improve the performance of the upgraded speakers:
• Dead the outer panel of the metal door
• Seal the inner panel of the door and make it airtight
• Dead the inner panel of the metal door
• Cover the inner panel with closed-cell foam.
• Seal with gasket each speaker.